Power Supplies

Started by Leatherface, November 01, 2013, 05:01:15 PM

Previous topic - Next topic

Leatherface


Leatherface

Someone use that kind of battery?

Nasir K.

Ahoj, musicians/noisicians/FX maniacs around the world!

Few months ago I bought a Behringer Xenyx 1202fx controller with no PSU.

Few days ago I bought a PSU and when I'd connected all clip indicators have colored red.

Have anyone ideas?

Behringer original PSU features is:
2*14.8v 2*500A
Bought PSU is:
14.8v 2500A

What's the difference between this two?

deutscheasphalt

Quote from: Nasir K. on July 24, 2025, 04:02:20 PMAhoj, musicians/noisicians/FX maniacs around the world!

Few months ago I bought a Behringer Xenyx 1202fx controller with no PSU.

Few days ago I bought a PSU and when I'd connected all clip indicators have colored red.

Have anyone ideas?

Behringer original PSU features is:
2*14.8v 2*500A
Bought PSU is:
14.8v 2500A

What's the difference between this two?

Original MXUL6 power supply has a 3-pin connector plug:
pin 1 & 3 carry 14,8V (at least 0,5A each)
pin 2 GND

If you bought 2,5A that's plenty and the voltage is correct, you just have to make sure pins 1 & 3 are both supplied.